Table of Contents
Advertisement
24
User password
•
•
•
•
•
•
•
Administrator Password
The "Administrator Password" can be used in both the "Enter
Administrator Password" and "Enter Password" dialog boxes.
•
•
If you forgot your administrator password, do the following to
retrieve the administrator password:
•
•
Reset
•
•
PIP
•
PIP Source
Press
Composite, S-Video or Component signal.
PIP Location
Choose the PIP secondary signal location on the display screen.
PIP Size
Choose the PIP secondary signal size on the display screen.
Note: When PIP function is activated, zoom and keystone function
is unavailable.
Press
to setup or change the "User Password".
Press number keys to set your password on the remote control
and press "MENU" to confirm.
Press
to delete character.
Enter the password when you see "Confirm Password"
displayed.
The password should be between 4 and 8 characters long.
If you select "Request password only after plugging power
cord", the projector will prompt the user to enter the
password every time the power cord is plugged.
If you select "Always request password while projector turns
on", the user has to enter the password every time when the
projector is turned on.
Press
to change the "Administrator Password".
The factory default of "Administrator Password" is "1234".
An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number which will be accepted by
projector anytime no matter what the Administrator
Password is.
If losing this security card and number, please contact with an
Acer service center.
Press the
button and choose "Yes" to return the
parameters on all menus to the factory default settings.
Choose "On" to see two screens at the same time.
Choose "Off" to disable the function.
and
to choose the secondary video source:
Advertisement
Table of Contents
