RCA RC5400P User Manual page 20

Chapter 1
INFO SUBTITLE AUDIO
SETUP GUIDE MENU
2
1 3
4 5 6
7 8 9
CLEAR
+10
0/10
16
Number buttons (0-9) Use the number buttons to input information such as
chapter numbers, track numbers, or to make selections on some menu screens.
SOUND
Number buttons (0/10 and +10) The 0/10 button is used to enter a zero or 10.
When you need to enter a 2-digit number, press 0/10 to enter the number 10. The
RESUME
+10 button is used to enter 2-digit numbers larger than 10. For example, for the
number 11, press +10 and 1. For the number 12, press +10 and 2, etc. Each
ANGLE
consecutive press of the button increases by ten. So, if you press the +10 button 3
times, the number displayed is 30. For the number 34, you would press the +10
GO BACK
button three times and the 4 once.
ZOOM
MENU Brings up the DVD player menu.
REPEAT
PLAY MODE Press this button to access the Play Mode info banner to set random
and program playback.
A-B
(play/OK) Begins disc play and selects menu items.
PLAY MODE
(pause) Press this button to pause disc play. For DVD discs, press again to
play forward a frame at a time. For audio CDs, the second press resumes playback.
TIME SEARCH
REPEAT Press this button to bring up the Repeat info banner. You can repeat
INDEX
part or all of a chapter, track, or an entire disc.
RESUME Continues playback from point where playback was stopped.
(reverse) Press this button during playback to fast reverse through the disc.
SETUP Accesses the DVD player's menu system.
(slow forward) Advances picture slowly.
SOUND
(Stop) Stops disc play.
Switches between Stereo and Mono.
chapter 1