RCA RC5400P User Manual page 15

chapter 1
Connect to a TV
1. Connect end of the audio cable with the single plug to the AUDIO OUT jack
on the back of your DVD Player, and the end with two plugs to the
corresponding Audio Input jacks (L = white, R = red) on your TV.
2. Connect the video cable.
• Basic video connection – Connect the video cable (yellow) to the VIDEO
AUDIO IN RIGHT
AUDIO IN LEFT
OUT jack on the back of your DVD Player, and to the Video Input jack on
VIDEO IN
your TV.
S-VIDEO
• S-Video (optional) – If your TV has an S-Video Input jack, connect the
S-Video adapter (included) to the S-VIDEO OUT jack on the back of your
DVD Player. Connect one end of an S-Video cable to the adapter and the
other end to the S-Video jack on your TV. If your TV doesn't have S-Video,
use the basic video connection listed above.
Note: Your cable or off-air connection to the television should not be
affected by this connection. Connect your cable or off-air antenna to
your television as you normally would. You may need to consult your
television manual for details.
Chapter 1
OR
GO TO PAGE 13
11