Assembly And Dismantle Detail - Panasonic NC-TWS30 Service Manual

2. Assembly and Dismantle
Detail
2.1. Bottom plate, Body
1. Remove 2 Tapping screws and 1 Truss screw from
Bottom plate.
2. Remove 1 screw and Sleeve from Body.
3. Remove black, white Lead Wire and Earth wire
from Peg frame.
4. Remove Body off.
2.2. Feed water pipe
1. Remove 1 screw off.
2. Remove Bushing from Water pipe packing A and
Container comp..
3. Remove Feed water pipe from Communicating
bushing.
Truss head screw
Bottom plate
Sleeve
Feed water pipe
Communicating
bushing
Water pipe
packing A
Water pipe
comp.
- 5 -
NC-TWS30
Tapping screw
(M4 x 12)
Screw
Fig. 1
Tapping scraw
(M4 x 8)
Container
comp.
Fig. 2
Body