Table of Contents
Advertisement
Acer
8)
Take out the screws which is locking the PCBA to front housing(use a screwdriver
to take off the screws in below picture, marked in red circle)
9)
Pull out the RF cable from the cable slot, then separate the PCBA from front housing;
SERVICE GUIDE
Remark: to avoid the side key FPC being
1、insert the tweezers point from bottom
side of FPC, to make its bottom side
separate from front housing ;
2、then insert the tweezers point from
topside , to make its top side separate from
front housing；
3、use tweezers to take out the FPC from
the slot slowly
Page 32/88
damaged when disassembling, pls
follow below steps:
Page : 32/77
Language :English
Date : 2014-07-02
Hide quick links:
Advertisement
Table of Contents
