Utilisation; Cleaning And Care - Kompernass KH 4232 Operating Instructions Manual

Drill pump
Table of Contents

Advertisement

Available languages

Available languages

IB_KH4232_BK35507_LB4B

Utilisation

Place the open end of the suction hose into the liquid that is to be pumped.
This is only possible if ...
– the suction hose does not draw air and is not longer than 12 meters
(ca. 39 feet), and
– the pressure hose is open during suction.
u
Allow the drill
, now the pump
so that you can react quickly in the event of danger. Absolutely ensure
that the electric drill
u
Should the rotation speed of the electric drill
use this to regulate the discharge flow.
Important!
Should the pump
q
not commence suction within 12 seconds switch it
off immediately, so as to avoid having it seize up. For this same reason, also
do not allow the pump
q
side is closed.

Cleaning and care

Clean the pump
q
with a dry or lightly moistened cloth only. To avoid damage
to the plastic surfaces, do not use solvents or abrasive cleaning agents.
The pump is maintenance free.
08.07.2009
14:00 Uhr
q
, to start-up – but not without supervision,
is rotating to the right, as with normal drilling.
u
be adjustable, you can
to commence suction if the hose on the discharge
- 7 -
Seite 7

Advertisement

Table of Contents
loading

Table of Contents