IB_KH4232_BK35507_LB4B
➭
Now push the pump
projects into the thread of the drive shaft
y
are located in the reception holes on the pump
➭
Allow the electric drill
ons and guide the pump
drive shaft
r
will be fixated onto the pump
➭
Attach the suction hose to the connection
a
connection
. Pay heed to the direction of flow
q
pump
.
Disassembly of the drive shaft
Disassembly of the short drive shaft e
➭
Open the chuck with the chuck key through the recess
q
the pump
from the mounting
➭
Unscrew the short drive shaft
the open-ended spanner from the pump
Disassembly of the long drive shaft r
➭
Using the open-ended spanner through the recess,
drive shaft
w
of the pump
➭
Allow the electric drill
revolutions. With this the drive shaft
➭
q
Remove the pump
➭
Remove the drive shaft
08.07.2009
14:00 Uhr
q
onto the mounting
y
so that the drive shaft
w
and the pins of the mounting
u
to run with a clockwise rotation and low revoluti-
q
straight on to the drive shaft
q
.
o
and the pressure hose to the
y
.
e
by using a cross-headed screwdriver and
q
.
q
.
u
to run with an anti-clockwise rotation and low
r
will be released from the pump
y
from the mounting
.
r
from the chuck.
- 6 -
Seite 6
r
q
.
r
. With this the
detailed on the
i
and then remove
i
counter screw the
q
.