Utilisation; Cleaning And Care - Kompernass KH 4232 Operating Instructions Manual

Drill pump
Table of Contents

Advertisement

Available languages

Available languages

Utilisation

Place the open end of the suction hose into the liquid that is to be pumped.
This is only possible if ...
– the suction hose does not draw air and is not longer than 12 meters
(ca. 39 feet), and
– the pressure hose is open during suction.
Allow the drill
so that you can react quickly in the event of danger. Absolutely ensure
that the electric drill
Should the rotation speed of the electric drill
use this to regulate the discharge flow.
Important!
Should the pump
off immediately, so as to avoid having it seize up. For this same reason, also
do not allow the pump
side is closed.

Cleaning and care

q
Clean the pump
to the plastic surfaces, do not use solvents or abrasive cleaning agents.
The pump is maintenance free.
u
, now the pump
u
is rotating to the right, as with normal drilling.
q
not commence suction within 12 seconds switch it
q
to commence suction if the hose on the discharge
with a dry or lightly moistened cloth only. To avoid damage
q
, to start-up – but not without supervision,
u
- 7 -
be adjustable, you can

Advertisement

Table of Contents
loading

Table of Contents