Assembly And Connection - Kompernass KH 4232 Operating Instructions Manual

IB_KH4232_BK35507_LB4B

Assembly and connection

➭
Assemble the mounting
as shown in the illustration.
Alternatively, the mounting
with screws (assembly material not supplied).
When using the short drive shaft e ...
➭
Screw the short drive shaft
➭
Insert the electric drill
➭
Now push the pump
projects into the chuck and the pins of the mounting
reception holes on the pump
➭
Now tighten the chuck with the chuck key through the recess
q
that the pump can no longer release itself from the mounting
➭
Tighten the cross-headed screw on the mounting
u cannot jolt around.
➭
Attach the suction hose to the connection
a
connection . Pay heed to the direction of flow
q
pump .
When using the long drive shaft r ...
➭
Attach the long drive shaft
➭
Insert the electric drill
chuck, into the mounting
➭
Tighten the cross-headed screw on the mounting
cannot jolt around.
08.07.2009 14:00 Uhr
y
with the clamp fastening
y can also be secured to a work surface
e
onto the drive shaft
u
with the chuck into the mounting
q onto the mounting y so that the drive shaft
q .
o and the pressure hose to the
r
into the chuck.
u
, with the pre-assembled drive shaft
y .
y
- 5 -
Seite 5
t
onto a work surface,
w q
of the pump .
y
.
e
y are located in the
i
so firmly
y
.
y firmly, so that the drill
detailed on the
r
in the
firmly, so that the drill u