Disassembly Of The Drive Shaft - Kompernass KH 4232 Operating Instructions Manual

➭
Now push the pump
projects into the thread of the drive shaft
y
are located in the reception holes on the pump
➭
Allow the electric drill
ons and guide the pump
drive shaft r
➭
Attach the suction hose to the connection
a
connection
q
pump .

Disassembly of the drive shaft

Disassembly of the short drive shaft e
➭
Open the chuck with the chuck key through the recess
the pump q
➭
Unscrew the short drive shaft
the open-ended spanner from the pump
Disassembly of the long drive shaft r
➭
Using the open-ended spanner through the recess,
w
drive shaft
➭
Allow the electric drill
revolutions. With this the drive shaft
➭
Remove the pump
➭
Remove the drive shaft
q onto the mounting
u
to run with a clockwise rotation and low revoluti-
q
straight on to the drive shaft
will be fixated onto the pump
. Pay heed to the direction of flow
from the mounting
e
q
of the pump .
u
to run with an anti-clockwise rotation and low
q
from the mounting
r
from the chuck.
y so that the drive shaft
w
and the pins of the mounting
q .
o
and the pressure hose to the
y
.
by using a cross-headed screwdriver and
q
.
r
will be released from the pump
y
.
- 6 -
q
.
r
. With this the
detailed on the
i
and then remove
i
counter screw the
r
q
.