Assembly And Connection - Kompernass KH 4232 Operating Instructions Manual

Assembly and connection

➭
Assemble the mounting
as shown in the illustration.
Alternatively, the mounting
with screws (assembly material not supplied).
When using the short drive shaft e ...
➭
Screw the short drive shaft
➭
Insert the electric drill
➭
Now push the pump
projects into the chuck and the pins of the mounting
reception holes on the pump
➭
Now tighten the chuck with the chuck key through the recess
that the pump
➭
Tighten the cross-headed screw on the mounting
u
cannot jolt around.
➭
Attach the suction hose to the connection
connection a
q
pump .
When using the long drive shaft r ...
➭
Attach the long drive shaft
➭
Insert the electric drill
chuck, into the mounting
➭
Tighten the cross-headed screw on the mounting
cannot jolt around.
y
with the clamp fastening
y
e
onto the drive shaft
u with the chuck into the mounting
q
onto the mounting
q
q
can no longer release itself from the mounting
. Pay heed to the direction of flow
r
into the chuck.
u
, with the pre-assembled drive shaft
y
.
can also be secured to a work surface
y
so that the drive shaft
.
o
and the pressure hose to the
y
- 35 -
t
onto a work surface,
w
of the pump
y .
y
are located in the
i
so firmly
y
y
firmly, so that the drill
detailed on the
r
in the
firmly, so that the drill
q
.
e
.
u