Error Messages - Samsung SCX-4500 Service Manual

4.1.7 Error Messages

Messages appear on the Smart Panel program window or on the control panel display to indicate machine status or
errors. Refer to the tables below to understand the messages meaning to correct the problem, if
necessary.
Message
OPEN
!! EE
LED blinks
LED blinks
LED blinks slowly
LED blinks rapidly
LED blinks rapidly
!! T1
!! T2
!! T3
Samsung Electronics
Meaning
The covers is not completely closed.
There is a problem in the machine.
There is no paper in the tray.
In the paper feed area and rear the
machine.
Rear and Inside the machine.
In the exit area.
The print cartridge which the arrow
indicates is almost empty.
The print cartridge which the arrow
indicates has run out.
The print cartridge is installed improperly,
or not installed.
The print cartridge you have installed is
not compatible with your machine.
The lifespan of cartridge is reached.
The print cartridge you have installed is
not a genuine cartridge.
Adjustment and Troubleshooting
Suggested solutions
Press the covers until it clicks.
Unplug the power cord and plug it back in.
If the problem persists, contact the service
representatives.
Load paper in the tray.
Clear the jam.
Clear the jam.
Clear the jam.
Take out the corresponding print cartridge
and thoroughly shake it. By doing this, you
can temporarily reestablish printing
operations.
Replace the corresponding print cartridge
with a Samsung-genuine cartridge.
Reinstall the print cartridge two or three
times. If the problem persists, the print
cartridge is not being detected.
Please contact the service representa-
tives.
Replace the corresponding cartridge
with a Samsung-genuine cartridge.
Replace the corresponding cartridge with
a Samsung-genuine cartridge.
Replace the corresponding cartridge with
a Samsung-genuine cartridge.
Service Manual
4-29