3. Unlatch the latch(2 EA) from the rear bottom of the
SET, as shown below.
4. Take out the Toner Cartridge.
5. To Remove the COVER-FUSER DUMMY, remove
the two screws and then release the COVER-FUSER
DUMMY.
Samsung Electronics
6. To remove the COVER-LEFT, Unlatch the latch(3 EA)
of the COVER-LEFT, as shown below.
7. Following 6. procedure, unlatch the rear latch of the
COVER-LEFT.
8. Release the COVER-LEFT.
Disassembly and Reassembly
Service Manual
3-3