Direct Key
1
Copies
2
Reduce/Enlarge
3
Darkness
4
Stop/Cancel
5
UP
6
Down
7
StartCopy
8
ScanTo PC
9
Power
Status LED
1
Error Led
2
Paper Status
3
Toner Status
4
Paper Jam Status
Samsung Electronics
1 99 * Default : 1
Would support: +50 ~ +199%
This key is to select darkness level. 5 levels are supported.
This key is used to stop the job being done or use in special key
sequence.
To increment/scroll UP
Decrement/Scroll Down
To start Copy Job
To Start PC Scan Job
To Power ON/Off
This Led will glow if there is any general error.
This led will glow if there is paper Empty condition.
This Led will glow if there is Toner error condition
This led will glow if there is paper Jam condition.
Adjustment and Troubleshooting
Service Manual
4-13