Daikin D-BACS Design Manual page 375

Adaptor
KRP1B56, 59
•
Refer to the WIRING DIAGRAM attached to the indoor unit before attempting to wire.
[Make sure wires to units do not pass over the PC board when wiring]
•
Wire the adaptor to the indoor unit as described below.
Fetching the operation display signal
•
Attaching an hour meter
Output is generated at the contact while
the compressor is running.
Example:
KRP1C3
358
Carrying capacity
20mA and above
or 1.2A and below
X1
AC 220
~240V
X2
HM
HM: Hour meter
(Field supplied part)
(FXZQ,FXD(Q) : X16A)
Indoor unit PC board
•
Fan ON display
Output is generated at the contact while the
fan is running.
Carrying capacity
20mA and above
Example:
or 1.2A and below
X1
X2
OL
OL: Operation lamp
(Field supplied part)
2.7 <KRP1B61 / KRP1B56, 59 / KRP1C3> Adaptor for Wiring
AC 220
~240V