Seats - Mazda CX-3 Smart Start Manual

SE ATS
FOLDING REAR SEATS
Push the button to fold down the seatback.
(Left rear seat release is shown.)
NOTE:
For tall drivers and front passengers who adjust the
front seats all the way back, the headrests on the rear seats
need to be removed when folding the rear
seatbacks down. If not removed, the rear
headrest will push into the front seatback.
In order to remove the headrest from
the rear seat, the seatback needs to
be tilted slightly forward.
RETURNING REAR SEATS TO UPRIGHT POSITION:
1 Install the headrest (if removed).
2 Raise the seatbacks until they lock into position.
3 Pull on the top of the seatbacks to make sure they are locked.
4 Check that all seat belts are routed properly for passenger use.
MEMORY SEAT SWITCH (IF EQUIPPED)
To Program the Driver's Seat and Active Driving Display
position/brightness Memory Position.
1 Turn the ignition switch off.
2 Adjust seat to the desired position using the slide/tilt and
recline switches. Adjust the Active Driving Display position/
brightness using the MAZDA CONNECT settings. Push and
hold the memory seat SET button until a beep is heard.
3 Within 5 seconds:
• To program a memory seat button, push and hold memory button 1 or 2 until a beep
sound is heard.
• To program a key, push and hold the key unlock button until a beep sound is heard
(two registered keys can be programmed).
FUEL ECONOMY:
To achieve the best fuel economy, visit www.fueleconomy.gov
for more information.
Unlocked
Locked
Memory seat switch
m{zd{ cx-3
7