Mazda CX-3 Smart Start Manual page 20

N AV IGATI O N SYST EM
CO N T I NU ED
PLANNING A ROUTE USING VOICE COMMANDS
To plan a route to an address using your voice:
1 Push the TALK
2 When you hear the tone, say "Address".
3 When on the address screen, say the full address (without zip code) for your
destination, for example "123 Main St., Los Angeles, California". The system does
not recognize zip codes.
4 Say "Yes" if the address is correct. If shown a list of addresses, say the list number for
the correct address or say "None of these".
NOTE:
• For best results, say the full address without pausing between words.
• Voice guidance can be skipped by pushing the TALK
• When prompt voice guidance is muted, you will need to go into Navigation Settings to
turn the volume back on for the NAVI button to repeat the last instructions.
To remove or insert the MAP SD card (to update the map database):
1 Turn the ignition OFF.
2 Locate the SD card slot located in the
center console.
Remove card:
Open the cover and push the card once, then
pull it out.
Insert card:
Push the card in (label-side up), then
close the cover.
NOTE:
• Visit www.mazdausa.com/navigation and download the most recent map available
for your device for free for three years from vehicle delivery.
• For assistance with the navigation system, visit www.mazdausa.com/mazdaconnect or
call 800-430-0153.
• Only use your MAP SD card for operating and updating your navigation system.
DO NOT insert the MAP SD card into another vehicle or into any other device such
as a camera.
• DO NOT put other SD cards in this slot.
18
MAZDAUSA.COM
button on the steering wheel.
button.
SD card slot