Table of Contents
Advertisement
Figure 8. Secure Rails to Rack
6.
Align the 1U cable management tray so that the UP arrow is pointed in the correct direction and the side of the tray labeled
FRONT is to the front of the rack.
Figure 9. Align the Cable Management Tray
7.
Slide the 1U cable management tray into the rails until it locks into place.
8.
Prepare the cable chains and route the cables through the cable chains.
NOTE: Label the cables before routing them through the cable chains.
a. Align the cable chains so the latches are facing up and the hinges are all facing each other.
b. Unclip and open the all of the latches on the cable chains.
16
SCv360 Expansion Enclosure Installation
Advertisement
Table of Contents
