Thermostat Quick Reference - Vive Comfort TP-P-725 Operation Manual

Thermostat Quick Reference

2
1
Indicates the current room temperature
2 Time and day of the week
3 Low Battery Indicator: Replace batteries when this indicator is shown.
Button Options
Program Time Periods: This thermostat has 4 programmable time periods
per day.
System Operation Indicators:
The COOL ON, HEAT ON or
Note: The Compressor delay feature is active if these are flashing.
Hold is displayed when the thermostat program is permanently overridden.
7
8 Setpoint: Displays the user selectable setpoint temperature.
Stages: Indicates the stages of heat that are active.
8
2
o
7
1
3 LOW
Em
icon will display when the COOL, HEAT, or
Important:
The low battery indicator is displayed when the AA battery
power is low. If the user fails to replace the battery within 21
days, the screen will only show the low battery indicator but
maintain all functionality. If the user fails to replace the
batteries after an additional 21 days (days 22-42 since first "low
battery" display) the set points will change to 55˚F(Heating) and
85˚F(Cooling). If the user adjusts these setpoints away from
these it will hold for 4 hours then return to either 55˚F or 85˚F.
After day 63 the batteries must be replaced immediately to
avoid freezing or overheating because the thermostat will shut
the unit off until the battery is changed.
Battery Door Information
(fan) is on.
Use the finger bevel on
the lower portion of the
thermostat to open the
easy access battery door.
Thermostat Quick Reference
Replace with
2 AA Alkaline
Batteries. High
quality Alkaline
batteries are
recommended.
Simple operating instructions are
found on the back of the battery door.