Thermostat Operation - Vive Comfort TP-P-725 Operation Manual

Thermostat Operation

FAN
ON AUTO
LCD Display
Glow in the dark light button
Fan Switch
OFF HEAT
COOL EmH
Temperature Setpoint Buttons
System Switch
User Buttons
LCD Display
See page 4 for details about
this display read out.
Glow in the dark light button
The glow in the dark light
button will self illuminate for
several hours after
exposure to ambient light. This
button turns on the display
light when pressed.
Fan Switch
Select ON or AUTO. ON will run
the fan continuously. AUTO will
cycle the fan on only when the
heating or cooling system is on.
Temperature Setpoint Buttons
Press the + or - buttons to
select the desired room tem-
perature.
Caution:
When the battery icon appears replace your AA
LOW
batteries immediately. Failure to do so may result in your heat-
ing & cooling system becoming inoperable. Freezing or over
heating can occur.
Thermostat Operation
System Switch
Selects the operation mode
on your HVAC system.
Selecting HEAT turns on
the heat mode. Selecting
COOL turns on the cool
mode. Selecting OFF turns
both heating and cooling
off. Selecting EmH (for heat
pumps with auxiliary heat)
will lockout the compressor
and control emergency/
auxiliary heat.
User Buttons
Use these buttons to set up
your programming options.
Refer to the next page for
detail.