1. Manuals
  2. Brands
  3. Vive Comfort Manuals
  4. Thermostat
  5. TP-Z-RISW
  6. Installation manual

Vive Comfort TP-Z-RISW Installation Manual

Zone thermostat
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

C O M F O R T
TP-Z-RISW
VIVE Comfort
P.O. Box 3377
Spring eld, MO 65804
Toll-Free: 1-800-776-1635 Web: www.vivecomfort.com
Hours of Operation: M-F 9AM - 6PM Eastern
This manual covers
the following models:
• TP-Z-RISW
(For use with TP-Z-955W Zoning Thermostat)
Congratulations on purchasing
our Wireless Zoning System.
This Zone Thermostat was designed to the
highest reliability and ease of use standards.
Thank you for choosing our quality products.

Table of Contents

® U.S. Registered Trademark. Patents pending.
Copyright © 2014. All rights reserved.
TM
Page
2
3
4
5
6
7-8
9
ZONING INSTALLATION MANUAL
A trained, experienced technician
must install this product.
Carefully read these instructions. You
could damage this product or cause a
hazardous condition if you fail to follow
these instructions.
Caution:
Equipment damage hazard
Do not operate the cooling
system if the outdoor
temperature is below 50˚ F
(10˚ C) to prevent possible
compressor damage.
Rev. 1407
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP-Z-RISW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vive Comfort TP-Z-RISW

Summary of Contents for Vive Comfort TP-Z-RISW

  • Page 1: Table Of Contents

    This manual covers Carefully read these instructions. You the following models: could damage this product or cause a • TP-Z-RISW hazardous condition if you fail to follow these instructions. (For use with TP-Z-955W Zoning Thermostat) Congratulations on purchasing our Wireless Zoning System.

  • Page 2: Quick Reference

    QUICK REFERENCE Getting to know your Zone Thermostat Setpoint Temperature Displays the user selectable setpoint temperature. Wireless Icon The Setpoint Adjustment and Operational Keys will only appear if enabled at the 'Show Set' step in Tech Setup. Temperature Indicates the current ambient temperature.

  • Page 3: Installation Tips

    INSTALLATION TIPS Zone Thermostats The remote should be mounted or placed approximately 4 to 5 feet above the oor. Select an area with average temperature and good air circulation. Do not mount or place thermostats in following locations: • Close to hot or cold air ducts •...

  • Page 4: Mounting Options

    MOUNTING OPTIONS Wall Mount - Permanent ** It is Best for the remote to stay in the zone it is sensing; permanent wall mounting is recommended. Mount subbase Remove the thermostat from the subbase. to the wall Inside View of Subbase of Thermostat Wall Mount - Removeable Slide the thermostat over...

  • Page 5: Battery Installation

    INSTALLING BATTERIES Installing Batteries for Temporary Wall Mount or Table Placement Use the nger tab on the back of the Once you have removed the door from the back remote to remove the battery door. of the remote, insert 2 AA Alkaline batteries and replace the battery door.

  • Page 6: Establishing Communication

    ESTABLISHING COMMUNICATION Remember Back of Zone Thermostat FSK/ ASK Switch Our Wireless Zoning System contains selectable wireless communication. Each component has a jumper switch labeled FSK and ASK. Default setting: FSK. All components must be set to the same position for wireless communication.

  • Page 7: Technician Setup Menu

    TECHNICIAN SETUP MENU Technician Setup Menu This zone thermostat has a technician setup menu for easy installer con guration. To set up Use the key to move to the next tech setup step. the remote for your particular application: Press and hold the LIGHT button for 3 Use the key to make adjustments seconds.
  • Page 8 TECHNICIAN SETUP MENU Tech Setup Steps (Continued from previous page) Low Temperature High Temperature Setpoint Room Temperature F° or C° Setpoint Limit Limit Calibration This feature allows the installer to This feature sets the display This feature allows you to set a This feature allows you to set a change the calibration of the room temperature to read either Fahrenheit...

  • Page 9: Speci Cations

    SPECIFICATIONS & CONTACT INFORMATION Speci cations The display range of temperature 32ºF to 99ºF (0ºC to 37ºC) The control range of temperature 44ºF to 90ºF (7ºC to 32ºC) Display accuracy ± 1ºF Power source Battery power from 2 AA Alkaline batteries 32ºF to +105ºF (0º...

Table of Contents