Step 4 Program The Thermostat - Honeywell CT3400 Programming And Installation Instructions

STEP 4 Program The Thermostat
After the batteries are installed, the thermostat
can be easily programmed in your hand before
it is installed on the wall.
If you would prefer to program the thermostat
after it is installed on the wall, skip to page 16,
and return later to this programming section.
The following personal programming chart
(pages 11 and 12) may be helpful when plan-
ning your program schedule of time and tem-
perature settings for various times of the day.
Four time periods are available—MORNING,
DAYTIME, EVENING and NIGHT. Each
period has its own setting key.
MORNING is the time period you want the
house at a comfortable temperature, af-
ter you get up, while you get ready for
work or school. (This will be a higher
temperature during heating season, or a
lower temperature during cooling season.)
DAYTIME is the time period you can set for an
energy-saving temperature while you are
away at work or school. (This will be a
lower temperature during heating season,
or a higher temperature during cooling
season.)
EVENING is the time period you want the
house at a comfortable temperature for
activities before bedtime. (Again, higher
heat or lower cool.)
9 69-0733B—1