Table of Contents
Advertisement
Connecting to a Controller
To connect the Adaptec 335SAS enclosure, follow the instructions for
your Adaptec SAS or SATA controller.
Connecting One Enclosure to a SATA Controller
Using an internal SATA fan-out cable, connect the enclosure to the
SATA ports on the controller. It's important to attach the correct
connector to each port. When connecting to the backplane, port 0 starts
at the bottom of the connector.
AAR-1420SA
Continue with
Completing the Connections on page
Adaptec Storage Enclosure 335SAS
SATA
0
1
2
3
Ports
●
3
2
1
0
Notch at bottom
of connector
18.
15
Advertisement
Table of Contents
