Table of Contents
Advertisement
Hold the drive carrier so that the LEDs are on the right and the lever
3
is fully open. Slide it into the drive slot until you can hook the lever
into place and click it closed.
Repeat for all disk drives.
4
To remove the fan before installation, see
5
continue with
Removing the Fan (Optional)
You can remove the enclosure's cooling fan before installation if space
inside your server is limited and if your computer will provide sufficient
cooling without it.
Note: If you don't disable the fan function before removing it, a loud
alarm will sound when the enclosure is turned on. To disable the alarm,
see
Step 2 on page
To remove the fan:
Turn the enclosure so that the back is facing you. Gently press the
1
tabs on the sides of the fan and pull to remove it from the enclosure
(see figure on
Adaptec Storage Enclosure 335SAS
Installing the Enclosure on page
13.
page
13).
page
12. Otherwise,
14.
12
●
Advertisement
Table of Contents
