SMC Networks VJ3000 Installation And Maintenance Manual page 2

Manifold Mounting (Fig 10)
VV5J3-20
Mixed installation of 3 port-VJ300 and 5 port-VJ3000 on the same
manifold.
(VJ300 3 port valve) 1. Type VV5J3-20, 21P Manifold.
Ensure that the redundant R port is occluded with rubber plug part
Plug (VJ3000-33-1)
number VJ3000-33-1
Seal the no used R
2. Type VV5J-31, -S31, VV5J3-32, -S32, VV5J3-46, -S46, 32P
port in the end cover
Manifolds.
side on the base.
In the case of the above manifolds the A port of the 3 port valve is
connected to the B port on the manifold.
3. Type VV5J3-41, -S41
As per 1. above, additionally the A port of the 3 port valve is
connected to the B port on the manifold.
VV5J3-41
Difference between VJ3000 Series 4 and 5 ported valves (Fig 12)
(VJ300 3 port valve)
VJ3 30, 3
(4 Port)
Plug (VJ3000-33-1)
Steel ball is driven in.
Seal the no used R
port in the end cover
side on the base.
"B" port is taken as A port of 3 way valve.
Fig 10
Proper combination of VJ3000 Series solenoid valve,
gaskets and manifold (Fig 11)
Fig 12
4 Port Base Mounted type
5 Port body ported type
0 (VJ3 3 ) 0
(VJ3 2 ) Proper combination of VJ5000 Series solenoid valve,
3
3
gaskets and manifold (Fig 13)
Screws
M2.5x25
(with spring
Manifold washer)
A mark
Manifold
A mark
gasket
gasket
VJ3000-14-2
VJ3000-14-3
Applicable
Applicable base Applicable base
base
VV5J3-31 } VV5J5-20
VV5J3-20, 21P
Manifold base VV5J3-S31
Manifold base
VV5J3-32
VV5J3-S32
5 Port base
Screws
VV5J3-32P
mounted type
M1.7x17
0
(VJ3 4 )
3
Applicable base
VV5J3-41 }
Applicable
VV5J3-S41
base
Manifold base
Subplate
VV5J3-46
VV5J3-S46
A mark
Manifold
gasket
VJ3000-14-1
Fig 13
Proper combination of blanking plate assembly and
manifold base Mixed installation of 3 port-VJ500 and 5 port-VJ5000 on
the same manifold (Fig 14)
Blanking plate assembly Applicable base
VJ3000-21-2A
An adapter plate makes it possible to mount series VJ500 3 port
VV5J3-20
valves and series VJ5000 valves on the same manifold.
Manifold base
Blanking plate
For base mounted type, the A port of the 3 port valve is connected to
VJ3000-21-1
the B port on the manifold.
Adapter plate assembly DXT200-3-1A
Manifold gasket
VJ3000-14-3
Series VJ500
Body ported type
Blanking plate assembly Applicable base
VJ3000-21-2A
Subplate
Screws
VV5J3-41 }
M1.7x7 Manifold
gasket
VV5J3-S41
Blanking plate DXT200-9-1
VV5J3-46
VJ3000-21-1
VV5J3-S46
Manifold
Manifold gasket
VV5J3-31
base
VJ3000-14-1
VV5J3-S31
VV5J3-32
Applicable base
VV5J3-S32
VV5J5-20
Note: Manifold gasket VJ3000-
14-2 can be used with the
following manifold bases:
VV5J3-31 Fig 14
}
VV5J3-S31 Manifold
VJ5000 accessories
VV5J3-32
base
VV5J3-S32
Individual supply spacer (Fig 15)
An individual supply spacer complete with gasket may be fixed
between valve and subplate, so as to provide an individual pressure
Fig 11 supply to any valve.
Individual SUP. spacer assembly
DXT192-40-1A
For M2.5
spring
washer
Screws
M2.5x40.5
Applicable base
VV5J5-41
VV5J5-42
VV5J5-43
1 /
8
(P port)
DXT192-40-2A
33 VJ3 40, 3 43
(5 Port)
For M2.5
spring
washer
Applicable base
Screws
VV5J5-20
M2.5x40.5
Rc (PT) 1 / 8
Configuration of this
(P port)
surface is different.
Fig 15
Individual exhaust spacer (Fig 16)
An individual exhaust spacer complete with gasket may be fixed
between valve and subplate so as to provide an individual exhaust for
any valve.
Individual EXH. spacer assembly
DXT192-21-1A
Gasket
Applicable
DXT192-10-5
Applicable base
Gasket
base
For M2.5 spring
DXT192-10-2
VV5J5-20
VV5J5-40
washer
VV5J5-40
Screws
VV5J5-41
M2.5x36
VV5J5-42
VV5J5-43
Gasket Gasket
Applicable
DXT192-10-5 DXT192-10-5
base
VV5J5-41
VV5J5-42
VV5J5-43
2-M5x0.8
(R1, R2 port)
Fig 16
Spacer type regulator (reducing P port pressure) (Fig 17)
Mounting a spacer type regulator between the valve and the manifold
makes it possible to reduce the supply pressure of every valve.
Series VJ500
Base mounted type
ARBZ3000-00-P
Applicable base
Adapter plate
Adapter plate assembly
assembly
DXT200-3-1A VV5J5-40
DXT200-3-1A Screws
VV5J5-41
Screws M2.5x45
M2.5x9
VV5J5-42 (with spring
washer)
Adapter plate
VV5J5-43
DXT200-3-1
Adapter gasket
DXT200-6-1
Applicable base
VV5J5-40
Gasket
VV5J5-41
DXT192-10-5
VV5J5-42
VV5J5-43
Fig 17
Blanking plate (Fig 18)
A blanking plate can be used to blank spare stations.
DXT192-13-1A
Screws
M2.5x7 (with spring washer)
Blanking plate
DXT192-13-2
Base mounted type
Gasket
DXT192-10-2
Gasket
DXT192-10-2
Individual
SUP. spacer
P DXT192-40-2
Fig 18
Proper combination of VJ7000 Series solenoid valve,
gaskets and manifold (Fig 19)
Screws
M3x31
(with spring washer)
Base mounted type
Gasket
Gasket
DXT192-10-2
DXT199-21-4
Individual
SUP. spacer
Applicable manifold base Applicable manifold base
DXT192-40-2
VV5J7-20
VV5J7-40
VV5J7-21 VV5J7-41
VV5J7-42
Fig 19
Mixed installation of 3 port-VJ700 and 5 port-VJ7000 on
the same manifold (Fig 20)
An adaptor plate makes it possible to mount series VJ700 3 port valves
and series VJ7000 valves on the same manifold.
For base mounted type, the A port of the 3 port valve is connected to
the B port on the manifold.
Adapter plate assembly
DXT201-3-1A
Screws
M3x31
(with spring
washer)
Applicable
manifold base
VV5J7-20
Body ported type
VV5J7-21
Base mounted type
Gasket
DXT192-10-2
Individual
EXH. spacer
DXT192-21-1
Adapter plate assembly
DXT201-3-2A
Screws
M3x38
Applicable (with spring washer)
Screws
manifold base
M3x31
VV5J7-40
(with spring
washer)
VV5J7-41
VV5J7-42
Base mounted type
Screws
AXT624-28
M3x10
(with spring washer)
Adapter plate
DXT201-3-2
Gasket
DXT199-21-7
Fig 20
VJ7000 Accessories
Individual supply spacer (Fig 21)
An individual supply spacer complete with gasket may be fixed
between valve and subplate, so as to provide an individual pressure
supply to any valve.
DXT199-35-1A
Base mounted type
Applicable
Screws
manifold base AXT623-14
M3x47
VV5J7-40
(with spring
VV5J7-41
washer)
VV5J7-42
Individual SUP spacer
Screws
DXT199-35-1
M3x31
(with spring washer)
R1
Gasket
DXT199-21-7
1 /
2-
8
(SUP port)
Fig 21
Spacer type regulator (reducing P port pressure) (Fig 23)
Gasket
DXT199-21-7
Mounting a spacer type regulator between the valve and the manifold
makes it possible to reduce the supply pressure of every valve.
Blanking plate (Fig 24)
A blanking plate can be used to blank spare stations.
Individual exhaust spacer (Fig 22)
An individual exhaust spacer complete with gasket may be fixed between valve and subplate, so as to provide an individual exhaust for any valve.
DXT199-29-1A
Screws
AXT623-14
Series VJ7000
M3x47
Body ported type
Applicable (with spring
washer)
manifold base
VV5J7-20
VV5J7-21
R2
Gasket
DXT201-14-1
Individual EXH spacer
DXT199-29-1
Screws AXT624-28
R1
M3x10
2- 1 /
(with spring washer) Gasket
8
(Exhaust DXT199-21-4
Fig 22
Adapter plate
holes)
DXT201-3-1
Mounting direction of base
"O" ring
12.5x9.5x1.5
There is a possibility that the base mount type VJ is mounted to base or sub-plate with the wrong direction.
Regarding collect direction, refer to the drawings shown below and check the symbol of valve and base.
VV5J5-20/20P/40 type VV5J5-41/41P/42/43/43P type
Series VJ7000
Base mounted type
VV5J3-20/41/S41 type VV5J3-S31/S32 type
VV5J3-21P/31/32/32P type
VV5J3-46 type
ARBZ5000-00-P
Base mounted type
Screws
M3x55
(with spring
washer)
Gasket
DXT199-21-7
Fig 23
Screws
DXT199-22-1A
VK300-33-3
M3x8
(with spring washer)
Blanking plate
DXT199-22-2
Gasket
DXT199-21-6
Fig 24
Environment
When valve is mounted in a control panel or is energised for long
periods of time, make sure the ambient temperature is within the
specified range.
DXT199-29-2A
Screws
AXT623-14
M3x47
Applicable
(with spring
manifold base
washer)
VV5J7-40
VV5J7-41
VV5J7-42
R2
Individual EXH spacer
DXT199-29-2
R1
1 /
2- Gasket
8
Exhaust DXT199-21-7
holes
Subplate type VV5J7-20/21/21P/40/41/42 type Subplate type
VV5J3-S46 type Subplate type
VV5J3-35* type