NETGEAR GS308P Installation

Installation
8-Port Gigabit Ethernet Switch with
4-Port PoE
GS308P

Package Content

• Switch
• Power adapter (localized to the country of sale)
• Wall installation kit
• Rubber feet
• Installation guide
Step 1. Connect the equipment.
IP Phone Server
GS308P Optional router
Sample connections
Step 2. Connect to power.
Step 3. Check the status.
Internet
Optional modem
Power LED Left Port LEDs (Ports 1–4)
On
Off
PoE Max LED
The maximum PoE power that the GS308P switch can deliver to all attached powered devices
(PDs) is 53 Watts total, with a maximum power to each port of 15.4 Watts. (For more
information, see PoE Considerations.)
The PoE Max LED indicates the status of the PoE power that the switch can deliver to all
attached PDs.
Less than 7W of PoE power is available on the switch (the LED is on).
The PoE Max LED was active in the previous two minutes (the LED is blinking).
Sufficient (more than 7W of) PoE power is available on the switch (the LED is off).
Right PoE LEDs (Ports 1–8)
1000 Mbps link PoE in use
PoE halted (see PoE
100 or 10 Mbps link
Troubleshooting)
No PoE use (off)
Activity (blinking)
No link (off)