Related Manuals for FSR DV-HMSW4K-88
Summary of Contents for FSR DV-HMSW4K-88
- Page 1 DV-HMSW4K-88 Matrix Manual Based on firmware revision 1.20 244 Bergen Blvd Woodland Park NJ 07424 973-785-4347 www.fsrinc.com 43059 LIT1486B...
-
Page 2: Proprietary Information
PROPRIETARY INFORMATION All information in this manual is proprietary to and the property of FSR Inc. This publication is protected by the Federal Copyright Law, with all rights reserved. No part of this document may be reproduced, transcribed, or transmitted, in any form or by any means, without prior explicit written permission from FSR Inc. -
Page 3: Limited Warranty
FSR factory or Authorized Repair Stations. This warranty shall be cancelable by FSR at its sole discretion if the unit has been subjected to physical abuse or has been modified in any way without written authorization from FSR. FSR’s liability under this warranty is limited to repair or replacement of the defective unit. -
Page 4: Safety
SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. SAFETY ... -
Page 5: Table Of Contents
TABLE OF CONTENTS PROPRIETARY INFORMATION ..............2 UNPACKING ........................2 LIMITED WARRANTY ..................3 SAFETY ..........................4 DESCRIPTION ....................6 APPLICATION DIAGRAM ................7 DIMENSIONS ....................8 PANEL DESCRIPTION ..................9 FRONT PANEL ........................ -
Page 6: Description
DESCRIPTION The DV-HMSW4K-88 8x8 HDMI Matrix routes eight HD sources to any eight HDTV displays. The unit supports 1080p Full HD up to 4K plus all 3D formats, along with ® ® multichannel digital audio formats such as PCM, Dolby... -
Page 7: Application Diagram
APPLICATION DIAGRAM IR INPUT IR OUTPUT (RECEIVER) (EMITTER) IR INPUT IR OUTPUT RS-232 HDMI INPUT HDMI OUTPUT WIRED 12 VDC CONTRO L WIRED IR LAPTOP CAMERA MONITOR MONITOR MONITOR MONITOR CONTROL INPUT BLUE-RAY SET-TOP MONITOR MONITOR MONITOR MONITOR POWER SUPPLY... -
Page 8: Dimensions
DIMENSIONS DV-HMSW4K-88 POWER INPUT SELECT MENU 1.25 1.74 DV PRO - HDMI 8x8 4K MATRIX SWITCHER LOCK OUTPUT SELECT SELECT DOWN ENTER 18.34 19.02 17.32 CHASSIS WIDTH IR INPUT IR OUTPUT RS-232 HDMI INPUT HDMI OUTPUT WIRED 12 VDC CONTROL... -
Page 9: Panel Description
PANEL DESCRIPTION Front Panel DV-HMSW4K-88 POWER INPUT SELECT MENU DV PRO - HDMI 8x8 4K M A TRIX SWITCHER LOCK OUTPUT SELECT SELECT DOWN ENTER 1. LCD display — Shows the status of input-output selection, EDID info and other information. -
Page 10: Back Panel
12. ALL button — Routes the specified input to all the outputs 13. SELECT button 14. DOWN button 15. ENTER button Back Panel IR INPUT IR OUTPUT RS-232 HDMI INPUT HDMI OUTPUT WIRED 12 VDC CONTROL 1. 8 IR inputs 3.5mm stereo phone-jack 2. -
Page 11: Front Panel Operation
NOTE: The EDID for an output can also be copied and used for a specified input(s) by scrolling to "COPY OUTx EDID" and selecting. The display must be connected to the DV-HMSW4K-88 prior to performing the EDID settings. 6. Scroll to the desired audio channel and press SELECT. -
Page 12: Set The Edid To The Default Setting Sub-Menu
1. Press the MENU button to display "1. EDID Setting" 2. Use the DOWN button to scroll to display "4. Tech Support". 3. Press the SELECT button to display the FSR Tech support contact information. Firmware version Sub-Menu (Informational) 1. Press the MENU button to display "1. EDID Setting"... -
Page 13: Matrix Routing
To select and route an input to an output press the desired INPUT SELECT button and then an OUTPUT SELECT (or vice versa) button to specify a route. The DV-HMSW4K-88 will switch and the current route status will be shown on the LCD Display. -
Page 14: Ir Remote Control Routing
IR REMOTE CONTROL ROUTING Set EDID Succession Setting the EDID with the IR remote control Video 1080i 1080p 1080p 3D 4K Audio 2.0Ch 5.1Ch 7.1Ch Input 1 2 3 4 5 6 7 8 ALL 1. Press the desired resolution button on the EDID section of the remote control. 2. -
Page 15: Copy Edid
To select and route an input to an output simply press the desired OUTPUT SELECT button and then INPUT SELECT (or vice versa) button on the remote to specify a route. The DV-HMSW4K-88 will switch and the current route status will be shown on the LCD Display. - Page 16 MATRIX IR ROUTING EXAMPLES...
-
Page 17: Graphical User Interface (Gui)
GRAPHICAL USER INTERFACE (GUI) The GUI provided is limited to firmware updates, device tag and static network settings. Operating System: Microsoft Windows Vista, 7, 8 and 8.1 To change the network settings and/or device tag click on the "General" tab and then click on "Search"... - Page 18 Select the desired matrix from the drop down menu and click on "Yes" Click on "Configure"...
- Page 19 Change the desired network settings and/or Device Tag and click on "Ok" To reset the network settings and the Device Tag, click on "Reset" and then "Ok"...
- Page 20 To update the firmware, click on the "FW upgrade" tab. Click on the folder icon to locate the firmware file Click on "Upgrade" NOTE: Do not power off the matrix while updating.
-
Page 21: Web Interface Control
WEB INTERFACE CONTROL The DV-HMSW4K-88 can be control via a Web browser, open a Web browser and type the unit's IP address. Switching and additional Matrix settings can be configured via Serial and TCP/IP (TELNET). Refer to the DV-HMSW4K-88 Serial protocol manual for additional... -
Page 22: Default Communication Settings
DEFAULT COMMUNICATION SETTINGS Ethernet RS-232 IP: 192.168.5.71 Baud rate: 57600 bps DB-9 Gateway: 192.168.5.1 Data bits: 8 Matrix Subnet mask: 255.255.255.0 Parity: None Port: 23 Stop bits: 1 Connection type: Flow control: None Straight-through or crossover Connection type: Straight-through NOTE: The Matrix can be controlled by a third party controller using a persistent or non-persistent TCP/IP connection.
Need help?
Do you have a question about the DV-HMSW4K-88 and is the answer not in the manual?
Questions and answers