Notices - Cactus V5 Duo User Manual

LED BLINkS? POSSIBLE CAUSE
TX: Yes 1. Poor hot shoe
(GREEN)
RX: Yes
(GREEN)
2. Flash used
3. Poor cable
4. Wrong cable

12. Notices

NOTICES FOR CUSTOMERS IN THE U.S.A
Federal Communications Commission (FCC) Radio
Frequency Interference Statements:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
contact
is not
compatible
with V5
connection
is used (only
when V5 is used
as Wireless
Shutter
Release)
SOLUTION
- Adjust tightness of hot
shoe contact
- Remove hot shoe metal
plate
- Clean hot shoe contact
of V5 and flash with
clean cloth
- Check that the flash used
is compatible with V5
(refer to Compatibility
section of this user
manual)
- Check cable connection
- Change cable
- Ensure that an
appropriate shutter
release cable is used
19