Cactus V5 Duo User Manual page 11

7.2
4. Set both TX and RX to the same channel
using the Channel Dial.
5. On TX, press the Test button. The status
LED of both TX and RX should blink in
GREEN simultaneously.
6. Attach TX to the camera's hot shoe. If
your camera does not have a hot shoe,
connect TX to the camera using a PC sync
cable (CA-100) .
7 . Press the camera's shutter release
button.
As Wireless Shutter Release
(requires optional shutter release cable)
Notes:
This function requires the use of a
separately purchased shutter release
cable for connection between the
transceiver and camera. This cable is
NOT included.
A minimum of two Cactus V5 transceivers are
required to operate Cactus V5 as a wireless
shutter release.
1. Install two AAA batteries into each
Cactus V5 transceiver. Ensure that all
plastic battery wrapping is removed and
11