3.1 CONNECT TO JABRA LINK 370 3.2 CONNECT TO MOBILE DEVICE (BLUETOOTH) 3.3 CONNECT TO BLUETOOTH HEADSET 4. HOW TO USE THE JABRA SPEAK 510 .. 11 4.1 MULTIPLE CALL HANDLING 4.2 SWITCH BETWEEN BLUETOOTH DEVICES 4.3 VOICE GUIDANCE ON/OFF 4.4 SMART BUTTON...
Newer Speak 510+ variants (with the Smart button) have a Ver. ID beginning with F, or later. Older Speak 510+ variants (without the Smart button) have a Ver. ID beginning with A, B, C, or D. The Ver. ID can be found on the bottom of the Speak 510.
Newer Speak 510+ variants (with the Smart button) have a Ver. ID beginning with F, or later. Older Speak 510+ variants (without the Smart button) have a Ver. ID beginning with A, B, C, or D. The Ver. ID can be found on the bottom of the Speak 510.
2.1 TURN ON THE JABRA SPEAK 510 Plug the Jabra Speak 510 USB cable into any available USB port on your computer, or Press and hold (2 secs) the On/Off button to turn the Jabra Speak 510 on or off.
3. CONNECTING 1. Plug the Jabra Speak 510 USB cable into any available USB port on your computer. 2. Select the Jabra Speak 510 as the default audio device in Windows Control Panel sound settings, and in your softphone audio settings.
3.1 CONNECT TO JABRA LINK 370 If using a Jabra Speak 510+, the speakerphone and Jabra Link 370 are pre-paired and ready to use out of the box. TO CONNECT THE SPEAKER AND JABRA LINK 370: 1. Press and hold (2 secs) the Bluetooth button on the Jabra Speak 510 until the Bluetooth light flashes blue.
Jabra Speak 510 until the Bluetooth light flashes blue. Release the button when you hear the connection instructions. 2. Enable Bluetooth on your mobile device, and select the Jabra Speak 510 from the list of available Bluetooth devices. If prompted for a password enter 0000.
3.3 CONNECT TO BLUETOOTH HEADSET For privacy, a bluetooth headset can be connected to the Jabra Speak 510. 1. Plug the Jabra Speak 510 into any available USB port on your computer. 2. Put the Bluetooth headset into pairing mode (refer to your headset manual for instructions).
4. HOW TO USE THE JABRA SPEAK 510 Mute microphone Battery level Bluetooth Volume Volume up down Smart button Answer call End/reject call On/Off Press and hold (2 secs) the On/ On/Off Off button until the lights flash Answer call...
Jabra Direct to enable speed Smartphone dial) dependent) 4.1 MULTIPLE CALL HANDLING The Jabra Speak 510 can accept and handle multiple calls simultaneously. Put current call on Tap the Answer call button hold and answer incoming call Switch between...
The connected devices will be announced. 2. Release the Bluetooth button when the correct device is announced. The Jabra Speak 510 will establish a connection with the device(s). When a connection has been established the device(s) will be announced.
To use the Smart button to activate your smartphone’s voice assistant (e.g. Siri, Google Assistant, Cortana) or to speed dial a phone number on your smartphone or computer, install Jabra Direct on your computer and enable the Smart button in the Speak 510 settings.
Jabra devices. TO UPDATE FIRMWARE: 1. Connect to a computer via USB. 2. Download and install Jabra Direct. 3. Check for the latest firmware via Jabra Direct.You will receive notifications whenever there is an update for your device.
Avoid storage at extreme temperatures (above 70°C/158°F or below -40°C/-40°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance. Do not expose the Jabra Speak 510 to rain or other liquids.
Need help?
Do you have a question about the Speak 510 and is the answer not in the manual?
Questions and answers