Using Headphones; How To Use Your Clip Budphones; Connecting The Lyra Player To Your Computer - RCA Lyra RD2312 User Manual

Before You Begin

Using Headphones

EN
Insert phone plug into the headphones
jack ( ) of the player for listening.
Have a Blast- Just Not in Your Eardrums.
Make sure you turn down the volume on
the unit before you put on headphones.
Increase the volume to the desired level
only after headphones are in place.
Caution:
Do not insert ear hook into
your ears.
How to Use Your Clip
Budphones
The right ear clip phone is labeled R
while the left ear clip phone is labeled L.
1. Slide the ear hook behind the ear with
the ear pad on the front of the ear.
2. For best sound quality, make sure the
earpad fits closely with your ear.
7
How to Use Your Belt Clip
The belt clip supplied with the unit can
let you carrying the unit anywhere you
like.
1. Replace the belt clip with the battery
compartment door.
2. To remove the belt clip, place your
finger on the position indicated and push
it out from the battery compartment.
3. Replace the battery compartment door.
Before You Begin
Connecting the Lyra Player
to your Computer
1. Lift the rubber cover that is covering
the USB socket on the player.
2. Insert the smaller end of the
USB cable into the socket on
the unit tightly.
3. Insert the larger end of the
USB cable to the USB socket on
the back of the computer.
Note
Refer to the "USB Driver
Installation; MusicMatch
TM
Jukebox Software" instruction
manual for procedures in setting up
USB drivers and transferring files
to the player.
Note
You must profile your
contents on your PC or on
the unit after file transfer in order
for the new files to appear in the
Navigation Menus. Refer to the
software instruction manual for
profiling details.
8
EN