RD1028 EN
6/18/04
10:18 AM
Page 18
Before You Begin
Using Headphones
EN
Insert phone plug into the headphones
jack (
) on the back of player for
listening.
Have a Blast- Just Not in Your Eardrums.
Make sure you turn down the volume on
the unit before you put on headphones.
Increase the volume to the desired level
only after headphones are in place.
How to Use Your Clip Phones
(The e.clipz)
The right ear clip phone is labeled R
while the left ear clip phone is labeled L.
L
R
1. Pull the ear hook away from the ear
pad slightly. You will hear a click
sound.
CLICK
7
2. Slide the ear hook behind the ear with
the ear pad on the front of the ear.
Rotate the clip phone so the ear pad
fits closely with the ear.
3. Lock the clip phone in place by
pushing down on the top of the ear
hook until it locks.
4. For best sound quality, make sure the
earpad fits closely with your ear.
CAUTION
DO NOT INSERT EAR HOOK INTO
YOUR EAR.
Before You Begin
Connecting the Lyra Player
File Download
to your Computer
When the unit is connected to the
computer, "USB Connected" will be
1. Lift the rubber cover that is covering
displayed on the screen.
the USB socket on the back of the
player.
During transfer, "USB Transfer ..." flashes
2. Insert the smaller end of the USB cable
on the display. When the transfer is
into the socket on the unit tightly.
complete, the display will change to "USB
Connected". Do not unplug the USB cable
when the display is flashing.
Refer to the "USB Driver
3. Insert the larger end of the USB cable
Installation; MusicMatch Jukebox
to the USB socket on the back of the
Software" instruction manual for
computer.
procedures in setting up USB drivers
and transferring files to the player
and / or the memory card.
EN
Note
TM
8