Fcc Notice; Industry Canada Statement - Kenmore 796.4198 series Use & Care Manual

FCC NOTICE

(for transmitter module contained in this product)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment to an outlet on a circuit diff
erent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation of the device.
Any changes or modifi cations in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user's authority
to operate the equipment.
Open Source Software Notice
To obtain the source code that is contained in this
product under LGPL and other open source licenses, visit
http://kenmore.com/opensource. In addition to the
source code, all referred license terms, warranty
disclaimers, and copyright notices are available for
download.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a
minimum distance of 20 cm (7.8 inches) between the
antenna and your body. Users must follow the specific
operating instructions for satisfying RF exposure
compliance.
Labeling
This device includes the following module.
Contains FCC ID: BEJ-LCW003
Contains IC: 2703N-LCW003

INDUSTRY CANADA STATEMENT

(for transmitter module contained in this product)
This device complies with Industry Canada's
licenceexempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of
the device.
This Class B digital apparatus complies with Canadian
ICES-003.
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum
distance of 20 cm (7.8 inches) between the antenna and
your body.
NOTE: The manufacturer is not responsible for any radio
or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the
user's authority to operate the equipment.
Wireless LAN Module Specifications
Model LCW-003
Frequency
2412 to 2462 MHz
Range
IEEE 802.11 b : 17.56 dBm
Output Power
IEEE 802.11 g : 25.53 dBm
(Max)
IEEE 802.11 n : 25.29 dBm
25
HOW TO USE