Configuring The Router; Connecting Via Ethernet Cable; Accessing The Web Interface - NetCommWireless NTC-400 Series Quick Start Manual

Hide thumbs Also See for NTC-400 Series:

Table of Contents

Configuring the router

The web interface can be accessed via WiFi or Ethernet.

Connecting via WiFi

1. Connect and power up the NTC-400 Series router.

2. On your client device (e.g. laptop, tablet), connect to the SSID labelled

"NetComm_2.4GHz_XXXX" or "NetComm_5GHz_XXXX" where "XXXX" is four

randomly generated digits. The unique SSID and password for the wireless

networks are printed on the back cover of this Quick Start Guide and on the

label affixed to the bottom of the device. Enter the WiFi password and then

continue to the "Accessing the web interface" section.

1. Connect and power up the NTC-400 Series router.

2. Connect a standard straight-through Ethernet cable to your client PC and the

other end to any of the LAN ports on the back of the NTC-400 Series router.

Continue to the "Accessing the web interface" section.

3. In a web browser on your client device, navigate to http://192.168.20.1

4. Enter the username and password printed on both the back cover of this

Quick Start Guide and on the label affixed to the bottom of the device, then

press Enter or the click the Login button. Refer to the User Guide for further

configuration instructions.

NOTE: We highly recommend that you secure the WiFi networks

upon initial installation and change the password used to access

the web interface.

NTC-400 Series Router

Table of Contents

Do you have a question about the NTC-400 Series and is the answer not in the manual?