Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for NetCommWireless NWL-25
Summary of Contents for NetCommWireless NWL-25
-
Page 1: Firmware Upgrade Instructions
4G LTE Light Industrial M2M Router NWL-25 Firmware Upgrade Instructions... - Page 2 1.2 – Updated for v2.0.29.6 firmware 18 December 2015 1.3 – Updated instructions for two separate module upgrade files 18 February 2016 1.4 – Updated for v2.0.29.11 firmware and LR3.3.2.0-21821 module firmware 18 April 2017 www.netcommwireless.com NWL-25 Firmware Upgrade Guide v1.4...
-
Page 3: Firmware Upgrade Procedure
“Advanced configuration” section of the User Guide for details. To upgrade your router’s firmware: Connect one end of the RJ45 (Ethernet cable) to the Ethernet port of the NWL-25 router (labelled “LAN”) and the other end to the Ethernet port of your computer. - Page 4 Repeat steps 7 and 8 for the router firmware file (ntc_nwl25_2.0.29.11.cdi) Note: The router may appear not to respond for approximately 3-4 minutes. Do not interrupt the router, disconnect the power or navigate to other pages of the user interface. www.netcommwireless.com NWL-25 Firmware Upgrade Guide v1.4...
- Page 5 15-20 seconds. The router reboots with the factory default settings. Confirm that the upgrade completed successfully by ensuring that the Model, Module firmware and Firmware version fields on the Status page match those shown below. www.netcommwireless.com NWL-25 Firmware Upgrade Guide v1.4...
- Page 6 If they do not match, refresh the page in the browser by pressing CTRL and F5. If the Model and Module firmware versions do not match, perform step 10 once more. When all versions appear as in the screenshot above, the firmware upgrade is complete. NWL-25 Firmware Upgrade Guide www.netcommwireless.com v1.4...
Need help?
Do you have a question about the NWL-25 and is the answer not in the manual?
Questions and answers