Front Panel Control - Ecler essentials eMIMO1616 User Manual

 Configuration of the 4 PAGER / DUCKER priority modules (with eMPAGE
messaging consoles / activated via audio level detection on the input in
question, respectively)
 Configuration of the eMCONTROL1 physical control panels connected to the
eMIMO1616 unit; connection status, enabled / disabled status; zone under
control, enabled functions (volume adjustment and MUTE and/or selection
or sound source and/or equalisation via 3-band EQ (BASS-MID-TREBLE),
etc.
 Creation, edition and configuration of the pilot panels, accessible from
external devices via the eMIMO pilot application or web browsers: public or
private panel (accessible only for specific users), enabled / disabled status,
zone under control, enabled functions (volume adjustment and MUTE
and/or selection or sound source and/or equalisation via 3-band EQ (BASS-
MID-TREBLE), graphical appearance (control types, slider or rotary, control
colours, texts and background), etc.

6.2. Front panel control

Using the physical controls on the front panel of the eMIMO1616 it is possible to
make adjustments to the various output zones from the unit. The settings available
for the various zones will be those that the admin user enabled via the web
application, and may range from blocking the entire front panel to complete
freedom to control all zones (volume adjustment, source selection and equalisation
adjustment), or the total or partial blocking of some of them.
Pressing a SELECT key corresponding to one of the outputs on the unit allows it to
be controlled via the CTRL key, the encoder and the LCD screen on the right of the
front panel. In addition, the LED indicator on the SELECT key pressed will flash
with a fixed rhythm (long off, short on), indicating that the output has been
selected for control. After a few seconds without changing the front controls, in
other words, without making any adjustments, the key will stop flashing.
20