SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
ETTING THE CLOCK
Touch CLOCK pad.
Use the number pads to enter the
Touch CLOCK pad again.
·This is a 12-hour cycle clock. When the
oven is first plugged in or when power
resumes after a power interruption, the
display will show ENTER CLOCK TIME. If
you prefer not to have the clock displayed,
ETTING THE OVEN TIMER
Enter the amount of time by touching the
·The maximum time you can enter is 99
minutes and 99 seconds.
·Time countdown can be seen in display for
5 seconds before clock or cooking time is
returned to display.
·Touch TIMER and then touch RESET to
cancel TIMER during timing process.
ETTING A COOKING PROGRAM
A. One-stage Cooking
Use the number pads to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
If you want to set a power level other
than 100% power, touch POWER, then
use the number pads to enter the power
level. You can set the power level from 1
Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
B. Two-stage Cooking
Some recipes require different stages of
cooking at different temperatures.
SET STAGE 1:
Follow steps 1 and 2 in "One-stage Cooking".
DO NOT TOUCH START/STOP.
SET STAGE 2:
Touch COOK then enter proper cooking time
and (lower) power level. (Most 2-stage
recipes use lower power for second stage.)