Raymarine AIS700 Installation Instructions Manual page 31

Problem Action required
No AIS tar- • Check MMSI number and static data
gets/data has been correctly configured.
shown
• Check the VHF antenna is properly
on MFD
connected and is not short circuiting
(AIS sym-
to the vessel structure.
bol shown
on Home-
• When connected using NMEA 0183
screen)
ensure the port used to connect
your transceiver to your MFD is set
to 38,400 baud rate.
• AIS Layer not enabled on MFD.
• MFD set to display Dangerous or
Buddy targets only and none are in
range of your vessel.
• No AIS equipped vessels in range.
Erratic or • More than 1 AIS unit is connected
conflicting and operating.
data
• NMEA 0183 and SeaTalkng ® / NMEA
2000 connected at the same time.
Troubleshooting
31