Selecting Rating Limit; Change Password; Misc - RCA RTD260 User Manual

RTD260 EN (07_06_06)
1 KID SAF – Kid safe; viewing safe even for kids.
2 G – General Audience; recommended as acceptable for viewers of all ages.
3 PG – Parental Guidance suggested.
4 PG13 – Material is unsuitable for children under age 13.
5 PGR – Parental Guidance-restricted; recommended that parents restrict children under
age 17 from viewing or allow children to view only when supervised by a parent or
adult guardian.
6 R – Restricted, under 17 requires accompanying parent or adult guardian.
7 NC17 – NO children under age 17; viewing not recommended for children under age
17.
8 ADULT – Mature material; should be viewed only by adults, due to graphic sexual
material, violence, or language.
Illustrations contained in this document are for representation only.
15/6/06 4:34 PM
Rating Explanations
Select Rating Limit
To select the rating limit, you have to unlock the player first.
1. Press the navigation arrow buttons to select Parental
Control and press OK.
2. Enter the super password 9688 and press OK.
3. 'Correct Password' is displayed.
4. Press the right arrow button to enter rating limit sub-menu.
5. To change the rating limit, highlight the RATING option and
press the right arrow button. Select the rating limit using
the up/down arrow buttons and press OK.
6. Rating limits take affect only when the player is locked.

Change Password

1. Select the Set Password option and press OK.
2. Enter your current password or super password 9688 and
press OK.
3. 'Correct Password' is displayed.Press OK. "Enter New
Password" is displayed.
4. Enter your new password and press OK. Password is
changed.

Misc

With this menu, you can restore the default settings.
Note: This option allows you to restore the player's setting to the
original factory settings. Any changes you have made to the
player's settings will be reverted back to the original settings,
except the password.
1. Select the Misc option in the main menu using the up/down
arrow buttons and press the right arrow button to highlight
'Use Default Settings'.
2. Press OK and press the left/right arrow buttons to select Yes
and press OK.
3. Default settings are restored.
Page 33
The Setup Menu
EN
29