Display Menus Flowchart - Roland CX-500 User Manual

7-2 Display Menus Flowchart

For details about each of the menus, see the "7-3 List of Functions".
Power on
CX-500
Roland DG Corp.
SELECT SHEET
ROLL PIECE
Use [ ] or [
LOADING SHEET
The selected material type is displayed on the lower line.
ROLL
Cutting area for the loaded material (width: W, length: L)
W1195mm L____mm
* L is not displayed except when [PIECE] is selected.
Press any key or send data.
TOP MENU
50cm/s
0.250mm 50gf
Send cutting
data.
PROCESSING 50gf
0.250mm 50cm/s
[MENU] + Power on
LANGUAGE
ENGLISH ENGLISH
SELECT SHEET
F-EDGE R-EDGE
] to select. Press [ENTER] to enable the setting.
When the cursor keys have been used to feed the material toward the rear of the machine, the display " OO mm" appears.
When the cursor keys have been used to feed the material toward the front of the machine, the display " OO mm" appears.
[PRESET]: Preset call-up
PRESET1
50-0.250-50
SPEED-OFFSET-FORCE
PRESET1
0.250mm
[FORCE]: Blade force adjustment
0.250mm
[SPEED]: Cutting-speed adjustment
0.250mm
[ ][ ][ ][ ]
W1195mm
Use the cursor keys to move the carriage.
Press [ORIGIN] for 0.5 seconds to set the new origin point.
[SHEET CUT] 0.5 seconds: This cuts off the material.
[TEST CUT] 0.5 seconds: This performs a cutting test. * This is also available at the cutting-area display screen.
[PAUSE]
CONTINUE PAUSE
STOP
[FORCE]
0.250mm
[SPEED]
0.250mm
Use [ ] or [ ] to select.
Press [ENTER] to enable the setting.
Use [ ] or [ ] to select. Press [ENTER] to enable the setting.
50cm/s
The selected preset No. appears on the top line.
50gf
Use [ ] or [ ] to change the value,
50cm/s
and press [ENTER] to enable.
50gf
20 to 350 gf (in increments of 10 gf)
Use [ ] or [ ] to change the value,
50cm/s
and press [ENTER] to enable.
50gf
1 to 85cm/s (in increments of 1cm/s)
L____mm
100mm
* This is also available at the cutting-area display screen.
[PAUSE]: This resumes cutting without change.
ENTER
[ENTER] 0.5 seconds: This quits cutting.
50cm/s
Key operations are the same as at the top screen.
50gf
50cm/s
Key operations are the same as at the top screen.
50gf
PRESET1
NORMAL-50
QUALITY-UPSPEED
W1195mm L____mm
ORIGIN SET
[ORIGIN SET] flashes.
43