Adjustment With An Adjustment Weight; Set The Siwatool Parameters - Siemens SIWAREX MS Quick Manual

4. Adjustment with an adjustment weight

4.1 Set the SIWATOOL parameters

When the communication is established check the following parameter-settings:
Adj.weight 1:
Enter the value of the adjustment weight.
The adjustment weight is an integer-value (up to 32767).
For example:
a) For a 20 kg scale you may use a resolution of 1 g:
- the parameter "Adj. weight 1" is set into gram (e.g. "20000").
- the parameter "Numeral step" (index card "Scales parameter") is set to "1".
- the parameter "Decimal point" (index card "Scales parameter") is set to "0".
- the parameter "Weight unit" (index card "Scales parameter") is set to "gr".
b) For a 40 kg scale you may use a resolution of 10 g:
- the parameter "Adj. weight 1" is set into gram x10 (e.g. "4000").
- the parameter "Numeral step" (index card "Scales parameter") is set to "1".
- the parameter "Decimal point" (index card "Scales parameter") is set to "2".
- the parameter "Weight unit" (index card "Scales parameter") is set to "kg".
©Siemens AG
SIWAREX_MS_Quick Guide_V4.0.doc, 12/2010
9