Kenmore 110.6163*610 Use & Care Manual page 9

4.
Select the desired cycle
Select the desired cycle for your load. See the "Cycle Guide"
for more information about each cycle.
Steam Refresh:
Reduces light wrinkles and odors from a few garments
at a time. Do not add dryer sheets.
5.
Set cycle settings, if desired
have selected a Sensing Cycle, Timed Cycle, or Steam Refresh
Cycle. See the "Cycle Guide" for detailed information.
NOTE: Not all options and settings are available with all cycles.
Not all cycles are on all models.
Sensing Cycles:
load, by touching DRY LEVEL to scroll to More, Normal, or
Less. Selecting More, Normal, or Less automatically adjusts the
the best drying in the shortest time. Drying time varies based on
fabric type, load size, and dryness setting.
NOTE: More Dry removes more load moisture. Normal Dry is
used for a starting point for Sensing cycles. Choose Normal Dry
to save energy. Less Dry removes less moisture and is used for
loads you may want to put on a hanger to complete drying.
Timed Cycles:
When you select a Timed Cycle, the default time appears in
the display. Touch "+" and "–" to increase or decrease the time
in 1-minute increments. Touch and hold to change the time in
5-minute increments. The default temperature may be changed
by touching Dry Temp until the desired dry temperature is lit.
6.
Select any additional options
Add additional options such as Energy Saver or Damp Signal
by touching that option. If you will be unable to remove the
load promptly, select the Wrinkle Guard™ options before
touching START.
Wrinkle Guard™ or Wrinkle Guard™
When you are unable to remove a load of clothes from
the dryer as soon as it stops, wrinkles can form. The Wrinkle
load to help keep wrinkles from forming. Depending on cycles
and settings, this option will add a short steam cycle after 60
minutes to help smooth out wrinkles. Get up to 150 minutes of
heat-free, periodic tumbling at the end of a cycle. Touch the
before the cycle has ended.
NOTE:
When the Wrinkle Guard™ option is selected and the
Cycle Signal is
30 minutes, and at the end of Wrinkle Guard™.
If you open the dryer door prior to the end of the Wrinkle
Guard™ option, the dryer will go into Pause mode. You
will need to touch
to continue Wrinkle Guard™ option. If
paused for 5 minutes, the dryer will time out to Standby;
touch to continue the Wrinkle Guard™ option.
7.
to begin cycle
Promptly remove items after cycle has completed to reduce
wrinkling. Use the Wrinkle Guard™ option to avoid wrinkling
when you are unable to remove a load from the dryer as soon
as it stops.
9