Download Print this page

Nokia Lumia 1520 Disassemble Manual page 3

Hide thumbs Also See for Lumia 1520:

Advertisement

Nokia Lumia 1520 – Disassemble Guide
Motherboard
http://www.fixez.com/
Now, use a heat gun or blow dryer to soften the
4.
adhesive securing the headphone jack to the rear
cover. With the fine-tip curved tweezers peel the
headphone jack up and out of the Nokia Lumia 1520.
Locate the two coaxial plug connectors (marked with open
5.
orange circles). Use the fine-tip curved tweezers, or the
spudger, to disconnect them from the motherboard.
Next, locate and remove the six small Phillips screws (#00) that
secure the motherboard to the Lumia 1520 (marked with
closed orange circles).
There are two protective plates covering a series of connectors
that need to be removed. The plate in the bottom right corner,
you can lift up and away from the motherboard. The plate
located in the bottom left corner, slide in the direction of the
orange arrows (see image) to remove it from the Nokia Lumia
1520 motherboard.
Now, use the spudger or the tweezers to gently pry up the
wafer connections that were located under a protective cover.
With all of the connections and securing screws
6.
removed, you can now maneuver the motherboard out
of the Lumia smartphone.
Page 3 of 6

Advertisement

loading