Page 1
DIY repair of the device simple, and safe. Following the comprehensive steps we have provided will help you quickly replace not only a broken Nokia Lumia 1020 display assembly (LCD & touch screen), but also any other internal components that may have become faulty or damaged.
Page 2
Display Assembly (LCD & Touch Screen) First, use the SIM card ejection tool, or a paperclip, to remove the SIM card tray from the Nokia smartphone. Next, remove the single T5 torx screw located in the SIM card slot. Back the screw out, releasing the locking bar for the display assembly (LCD &...
When lifting the LCD and touch screen assembly with the frame away from the smartphone, be sure to release the two connectors (marked with orange arrows) before completely removing it from the Nokia Lumia 1020. Front-Facing Camera Pry the front-facing camera assembly away from the display assembly using your fine tip curved tweezers, its secured with a small amount of adhesive.
Page 4
Using the flat end of your spudger, or a metal spudger/opening tool, slip it under the battery and pry it up from the securing adhesive and out of the Nokia Lumia 1020. Page 4 of 7...
Page 5
Locate the two wafer style connectors (marked with orange rectangles) and release them with the fine tip curved tweezers. Next, again utilizing the fine tip curved tweezers, release the headphone jack assembly connector and maneuver the assembly out of the Lumia 1020. Page 5 of 7 http://www.fixez.com/...
Page 6
Nokia Lumia 1020 – Disassemble Guide Last, use the flat end of the spudger to pry up and remove the motherboard from the Nokia Lumia 1020. Page 6 of 7 http://www.fixez.com/...
Page 7
1. Nokia Lumia 1020 Rear Cover and Housing 2. Nokia Lumia 1020 Battery 3. Nokia Lumia 1020 Motherboard 4. Nokia Lumia 1020 Display Assembly (LCD & Touch Screen) 5. Nokia Lumia 1020 Locking Bar 6. Nokia Lumia 1020 SIM Card Tray 7.