Table of Contents
Advertisement
Power Supply
Turning the Power On and Off
Turning the Power On
1.
Hold down the power key until the model name and version are
displayed on the screen.
After a few moments, the screen that was displayed the last time you
turned the power off appears.
If the CW500 does not start properly, stop using it immediately, and see
"Troubleshooting" in the manual in the CD.
Note
If you connect a different current clamp-on probe from the previous time
and turn the power on, the current clamp-on probe connected currently
will be displayed for 5 seconds, but the CW500 will not be automatically
configured to use it. Change the current clamp-on probe connection
setting on the basic setup screen.
If you turn the power on without connecting a current clamp-on probe,
the previous settings remain.
Turning the Power Off
1.
Hold down the power key for at least 2 seconds.
12
IM CW500-02EN
Advertisement
Table of Contents
