Dear Doctor, Thank you for placing your trust in this reverse osmosis water purifier. Since 1951, MELAG has specialised in the production of sterilisation equipment for medical practice. During this period, our family-owned and operated company has succeeded in becoming a leading manufacturer of sterilisation equipment.
CONTENTS Installation ..........................3 Information on components of the system ................3 Placing into operation for the first time ..................5 Connection of the MELAdem system ..................6 Connection of the MELAdem system to a Cliniklav 25 autoclave ................. 6 Connection of the MELAdem system to an autoclave Type 25 ................
Operating Manual MELAdem 55 1 Installation The MELAdem 55 demineralises water using the principle of reverse osmosis. Incoming water at mains pressure is passed through a semi-permeable membrane contained in a reverse-osmosis module. The mineral content of the water which permeates the membrane is reduced by approximately 95 %.
Page 4
It should only be closed if the system is not going to be used for a period of time (see Section 5“Maintenance instructions“ here), or during servicing and maintenance work. We also recommend fitting a Water Stop (MELAG Art. No.: 01056), in order to prevent damage due to leaks. 2: Pre-filter A pre-filter in an exchangeable filter cartridge helps to protect the sensitive reverse-osmosis membrane.
Operating Manual MELAdem 55 3 Placing into operation for the first time When placing the device into operation for the first time, please proceed as follows: 1. Remove the enclosure lid from the unit: unscrew the screws, and carefully remove the enclosure lid in an upward direction.
Storage tank for water purification system The MELAdem 55 reverse-osmosis system can be directly connected to autoclaves that have been prepared for connection of a non-pressurized automatic water feed system. With such a configuration, the autoclave directly pulls demineralised water out of the deeper-lying water storage tank.
Illustration 3 Autoclave Typ 25, complete with lower cabinet and water treatment unit (view from behind) The MELAdem 55 reverse-osmosis system can be directly connected to autoclaves that have been prepared for connection of a non-pressurized automatic water feed system. With such a configuration, the autoclave directly pulls demineralised water out of the deeper-lying water storage tank.
5 Maintenance instructions The following maintenance tasks should be carried out at the stated intervals in order to ensure trouble-free operation: Frequency Maintenance task Daily Check the permeate with the conductivity tester (with the Cliniklav 25 autoclave or the autoclave type 25, this will take place automatically, before every program run).
Operating Manual MELAdem 55 ____________________________________________________ 5.2 Replacement of the activated carbon filter • Turn off the mains water supply. • Unscrew the filter cylinder (a) from the head (b) • Remove the activated carbon filter unit (1) and place the new activated carbon unit in the cylinder (with the arrow •...
Need help?
Do you have a question about the MELAdem 55 and is the answer not in the manual?
Questions and answers