Page 3
Please read and save English EC-Declaration of Conformity, Mains connection, Maintenance, Symbols these instructions!
Page 5
VIII Accessory Technical Data . Technical Data . Technical Data . Technical Data XIII Technical Data . Technical Data . Technical Data . Technical Data Technical Data . Technical Data . Technical Data . Technical Data Technical Data . Technical Data . Technical Data . Technical Data Technical Data .
Page 7
>25 kg (55 lbs) Not included in standard equipment. PSU 1000...
Page 17
VIII LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT λ: 650 NM; P<1MW EN 60825-1:2007 We have supplied you with an adhesive label in your language and now request that you please apply this in place of the English text on the...
Page 26
TECHNICAL DATA PS 254 SB Mitresaw * Rated input 220-240 V, 50 HZ, S6(40%), 2000 W, 8.3 A No-load speed 4,500 min Saw blade dia. x hole dia 254 x 30 mm Saw blade thickness 1.8 mm Max. cutting capacity Mitre 0°/ Bevel 0°...
Page 27
The handle lock must always be engaged when transporting the SPECIFIED CONDITIONS OF USE mitre saw. The mitre saw can be used for sawing solid wood, bonded wood, a bench). ferrous metals and plastics. Do not use this product in any other way as stated for normal use. Before using the tool please read the instructions.
Page 28
MAINS CONNECTION SYMBOLS Connect only to single-phase AC current and only to the system CAUTION! WARNING! DANGER! voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II.