Sound Menu - RCA R52WH73 User Manual

Using the TV's Menu System
Go back
Sound settings
Sound type
Sound mode
SAP
Sound logic
Dynamic bass
Headphone settings
Graphic equalizer
The Sound menu for analog channels and all
video inputs.
Go back
Sound settings
Default Dig.Ch. Audio Lang.
Current Dig.Ch. Audio Lang.
Sound mode
Sound logic
Dynamic bass
Headphone settings
Graphic equalizer
The Sound menu for digital channels.
Go back
Left & Right balance
Amplifier
Subwoofer


Sound Menu

...
Stereo... The Sound menu lets you adjust audio output. To access the Sound menu, press
Normal...
MENU on the remote, and then select Sound from the main menu.
Depending on the kind of signal you're watching, the Sound menu will have
Medium...
different items available for you to adjust:
...
...
• If you're watching the TV on the ANTENNA/CABLE ANALOG INPUT
• If you're watching TV on the ANTENNA DIGITAL INPUT (look for a D
...
English...
English...
Normal...
This section describes the items available in both kinds of Sound menu.
Medium...
...
...
Sound settings The Sound settings submenu contains the following items:
Left & Right balance Use the left or right arrow button to center the bar
under the arrow to balance the left and right speakers.
Amplifier Use the left or right arrow button to select External (if your TV is
External...
using external amplifier only) or Internal (if your TV is using the speakers
External...
in the TV).
Subwoofer Set the TV's subwoofer to External, if the TV is using an
external subwoofer; or None.
Sound type (available for regular antenna signals and video
inputs) Press the right arrow button to scroll through the available audio
types, which control the way the sound comes through your speakers. The
options available vary according to the input selected.
Mono (available for regular TV viewing only) Plays the sound in mono
only. Use this setting when receiving broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into left and right channels.
Most TV programs and recorded materials have stereo audio. The word
Stereo appears in the channel banner when you tune to a program that is
broadcast in stereo.
Automatic (available for regular TV viewing only) Chooses the sound type
according to the current signal.
Left and Right (available for audio/video inputs only) Isolates either the
left or right channel of the incoming audio.
Default Dig.Ch. Audio Lang. (available for the digital channels only) Choose
the language you prefer for dialog on digital channels. If your preferred
language is being broadcast with a program, then the TV will play it. If not,
then the TV will play the default audio for the program (usually English in the
U.S.). The default digital channel audio language options are English, Spanish,
German, Italian, Japanese, Chinese, and Korean.
(look for an A on-screen as you change channels) or any of the video
inputs, you'll see the Sound menu items shown in the first menu on the
left.
on-screen as you change channels), you'll see the Sound menu items
shown in the second menu on the left.
Chapter