Philips BDP3306/F7 Service Manual page 21

Blu-ray disc player

Hide thumbs Also See for BDP3306/F7:

Table of Contents

4. OPU DATA WRITE

4-1. Connect the unit's AC power cord. Wait for about 30 seconds until the unit is in standby mode.

4-2. Double click on the [OpuDataWriter.exe] shortcut on the desktop to start the application.

4-3. Application start screen appears.

Select the assigned connection port of [USB Serial Port] for the [COM PORT] field located at the right corner

of the screen.

Check that [Please input OPU DATA] message is displayed in the Status Display.

Set the cursor position at the blank box next to the [OPU DATA].

4-4. Using the Barcode reader, scan the QR code attached to the BD Mechanism Assembly.

QR Code

4-5. Check that [FE CONNECTION CHECK] message appears on the Status Display then turn the unit power on.

If error occurs:

If an error occurs, the screen changes to a red display. In such case, close the window and then unplug the

unit AC power cord. Check if each device is properly connected then repeat from step 1.

Cursor position

Status Display

Select the assigned COM PORT

Status Display

1-8-3

B4(2D)_AIR

Table of Contents