Firmware Renewal Mode - Philips BDP3306/F7 Service Manual

Note: The file extension of the available firmware is
"b40".
1. Turn the power on and remove the disc on the tray
and close the tray.
2. Press [ ] (skip up), [6], [5], and [4] buttons on the
remote control unit in that order.
Fig. a appears on the screen.
F/W Version Mode
Please select software update mode.
Disc
USB
SD Card
The available software update mode will
differ depending on the model type.
Fig. a Version Up Mode Screen (Example)
3. Select "Disc" or "USB" or "SD Card" and press
[OK] button on the remote control unit. The tray
will open automatically, if "Disc" is selected.
4. Insert the disc or USB Memory Stick or SD Card
for version up.
5. The BD player enters the F/W version up mode
automatically. Fig. b appears on the screen. Make
sure to insert the proper F/W for the state of this
model.
F/W Version Mode
Loading Disc...
(*1)
Fig. b Programming Mode Screen (Example)

FIRMWARE RENEWAL MODE

" * " differ depending on the models.
F/W Name : ******* Ver *.**.**
" * " differ depending on the models.
F/W Name : ******* Ver *.**.**
The appearance shown in (*1) of Fig. b is
described as follows:
No. Appearance
1 Loading Disc
2 Reading...
3 See LED.
F/W Version Mode
1. ALL
Version : *.**.**
CHECKSUM : ****
See LED.
The unit will automatically turn off when update is completed,
and automatically turns back on.
Updating : LED flash alternately.
Success : LED remain on.
Error : All LED flash at the same time.
Fig. c Version Up Mode (LED model)
6. After the update, all LED lights and the power will
turn off automatically.
7. The power turns on automatically. If disc mode
was selected, the tray will open automatically.
Remove the disc or USB Memory Stick or SD
Card from the unit.
Note: All the settings will be put back to factory-
default.
The following USB Memory Stick/SD Card can be
used for software update. Make sure to use a device
that has enough space.
• USB Memory Stick (FAT16/FAT32 file system)
• SD/Mini SD/Micro SD Card (FAT12/FAT16 file system)
• SDHC/Mini SDHC/Micro SDHC Card (FAT32 file system)
1-7-1
State
Loading the disc
Sending files into the
memory.
Writing new version data,
the progress will be displayed
as shown in Fig. c.
" * " differ depending on the models.
F/W Name : ******* Ver *.**.**
***************.b40
B4(P&F)_(LED_Netflix Model)FW